We don't have the information on the removal and replacement of the blower motor-Sorry!
January, 7, 2012 AT 7:46 PM
1] Lift up bonnet
2] Remove scuttle panel - drivers side [remove the plastic lugs]
3] Remove and clean out all connections
4] Undo hex screws so that you can pull the motor out a bit
5] Clean and reconnect the connection under the motor
6] Give the motor a few taps with a light hammer incase it is sticking
7] Reconnect all connections
8] Use Vaseline around all connection, together with a spray of WD40 to
9] Replace scuttle panel, and replace lugs. Make sure the scuttle panels lip
is flush with the windscreen. I used Vaseline under the lip to aid
protection from water.