Plymouth Breeze 1998 Override switch

CARLSONE

MEMBER
1998 PLYMOUTH BREEZE

I have a Plymouth Breeze 1998 and am trying to hook up new remote starters for the alarm. The instructions say to "turn off the manual override switch" but I have no idea where that is located. Please help or let me know where I can find the owners manual to look it up. Thanks!

Friday, July 29th, 2011 AT 7:13 PM

5 Replies

CARADIODOC

MECHANIC
34,330 POSTS

No idea either. Are you referring to the car's anti-theft system? If your car is equipped with that from the factory, there is no switch. The system is turned off by unlocking a front door with the key or remote key fob. There is no other way to disarm or disable it.

Was this

answer

helpful?

Yes

Friday, July 29th, 2011 AT 7:38 PM

CARLSONE

MEMBER
3 POSTS

Yes I am referring to the anti-theft alarm system. The old remote key fobs arent working so I bought new ones that I need to sync up to the alarm system. The instructions tell you to turn the "valet switch" on and off to program. Don't know what/where that is. So the other option is to access the receiver under the dash by turning off the "manual override switch." Any idea what/where either of those are?

Off the manual override switch but dont know what or where that is.

Was this

answer

helpful?

Yes

Friday, July 29th, 2011 AT 7:46 PM

CARADIODOC

MECHANIC
34,330 POSTS

Did you put new batteries in the old remotes?

I'm searching but I don't see any reference to a valet switch.

Was this

answer

helpful?

Yes

Friday, July 29th, 2011 AT 8:14 PM

CARLSONE

MEMBER
3 POSTS

Yes I put new batteries in. One of them the hook broke off so I cant hook it to my keys. The other has a new battery just completely stopped working. Thanks for searching.

Was this

answer

helpful?

Yes

Friday, July 29th, 2011 AT 8:28 PM

CARADIODOC

MECHANIC
34,330 POSTS

I can't even find a programming procedure for owners to use. All I ever did at the dealership was to program them with their DRB3 scanner. Up to four remotes can be programmed but they all have to be done at once. Talk to the dealer's service guys to have them do the programming. That should take less than 15 minutes.

Was this