Im not getting any spark

Tiny
SMAN32
  • 1998 PLYMOUTH BREEZE
  • 160,000 MILES

Im not getting any spark. I have checked the coil and wires both check out iv replaced the cam and crank sensors but still no spark. Im only getting 2 volts to the cam and crank sensor when it says I should be getting 8 but I cant find any shorts. I was thinking pcm but not sure any ideas?

Do you
have the same problem?
Yes
No
Friday, December 7th, 2012 AT 8:30 PM

3 Replies

Tiny
WRENCHTECH
  • EXPERT
  • 20,567 POSTS

Do you have injector pulse?

What is the fuel pressure?

Was this
answer
helpful?
Yes
No
Friday, December 7th, 2012 AT 8:31 PM
Tiny
SMAN32
  • MEMBER

Well the car was running and then died at which point I stopped getting spark. When it was running it was getting proper fuel pressure. And I still have fuel pressure now that its not starting that is with in range of what the book says.

Was this
answer
helpful?
Yes
No
Friday, December 7th, 2012 AT 9:05 PM
Tiny
WRENCHTECH
  • EXPERT
  • 20,567 POSTS

Please answer the questions asked. If you haven't actually tested these things, then you need to do that next.

Was this
answer
helpful?
Yes
No
Friday, December 7th, 2012 AT 10:52 PM

Please login or register to post a reply.

Other Crankshaft Crankshaft Position Sensor CKS Location Questions