SPONSORED LINKS

After leaving lights on had to jump truck

Tiny
JENNIFERWEWE
  • MEMBER
  • 1998 NISSAN FRONTIER
After leaving lights on had to jump truck. Later that day nothing works. Got a new battery, nothing. Checked starter at Autozone, it works. Headlights only things coming on. Doesn't turnover, does nothing. Any ideas?
Saturday, March 30th, 2013 AT 8:28 PM

3 Replies

Tiny
FREEMBA
  • MECHANIC
  • 1,152 POSTS
Could be a bad battery cable (assuming that they are clean and making good contact at the battery and starter).

It is possible for them to corrode inside of the insulation.

To test, connect jumper cables from the positive battery terminal to the starters' battery terminal.
Connect the other jumper cable lead from the battery negative terminal to a good ground on the engine.
If the engine attempts to spin over, (or spins normally) change both battery cables.
Post your results here, please (it may be of assistance to someone else)
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, March 30th, 2013 AT 9:05 PM
Tiny
JENNIFERWEWE
  • MEMBER
  • 2 POSTS
It wasn't the battery cables it was the main fusible fuse that was blown.
Was this
answer
helpful?
Yes
No
Sunday, March 31st, 2013 AT 12:55 AM
Tiny
FREEMBA
  • MECHANIC
  • 1,152 POSTS
Thanks for letting us know. This may help someone in the future as the search for help on the web. Glad you got it fixed.
Was this
answer
helpful?
Yes
No
Sunday, March 31st, 2013 AT 1:01 AM

Please login or register to post a reply.

Related Battery Jump Content

How to Jump Start a Battery
VIDEO
How to Jump Start a Battery
Instructional repair video
Battery Jump Start
GUIDE
Battery Jump Start
A battery jump start using is a good way to get your car going using jumper cables which you can get from Amazon for between $16.00 and $38.00 (US). We recommend a good set...
VIEW MORE

Sponsored links