The check engine light is on for mass air flow

Tiny
OGLIKELE
  • 1998 LEXUS GS 400
  • 200,000 MILES

I changed engine and now the vsc light is on. Changed mass air flow and code still remains.

In park or nuetral car pulls back at 3000the rpm

Do you
have the same problem?
Yes
No
Wednesday, February 29th, 2012 AT 10:00 PM

9 Replies

Tiny
RASMATAZ
  • MEMBER

Try disconnecting the battery for 10 mins and see what happens to the VSC light

Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 10:33 PM
Tiny
OGLIKELE
  • MEMBER

Unhooked the battery with no change

Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 10:35 PM
Tiny
RASMATAZ
  • MEMBER

Get an OBD2 scantool or take it to Autozone and have them to try and erase the code-double check all wiring harness and connectors for loose and damages

Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 10:38 PM
Tiny
OGLIKELE
  • MEMBER

I put my scanner on it and tried clearing codes but they come right back

Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 10:43 PM
Tiny
RASMATAZ
  • MEMBER

What is the exact code you getting?

Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 10:46 PM
Tiny
OGLIKELE
  • MEMBER

I put my scanner on it and tried clearing codes but they come right back p0100 mass air

Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 10:51 PM
Tiny
RASMATAZ
  • MEMBER

Check the wiring of the MAF sensor back to the computer for short and open circuit

Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 11:00 PM
Tiny
OGLIKELE
  • MEMBER

What about vsc

Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 11:01 PM
Tiny
RASMATAZ
  • MEMBER

Have the vehicle stability control system further checked

Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 11:12 PM

Please login or register to post a reply.

Other Mass Air Flow Sensor MAF Replace/Remove Questions