BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Code 1399 with good wires plugs and cap rotor.
1998 HONDA CRV
Code 1399 with good wires plugs and cap rotor all replaced #2 cylinder sets off code is this a valve adjustment problem?
Friday, October 19th, 2012 AT 12:56 AM
P1399 is a temporary code set when misfires are detected. It could be valve adjustment, which would result in erratic idling or it could be the fuel injector.
Sunday, October 21st, 2012 AT 7:52 AM
to post a reply.
Related Brake Rotor Replace/Remove Content
Is It Possible To Change The Rotors, But Not The Brake...
Hello, I Have A 1998 Honda Crv. It Is An Automatic And Has About 110,000 Miles On It. Recently, I Went To The Mechanic Because The...
2003 Honda Crv Brake Rotor Flat-head Screw Removal?
Brakes Problem 2003 Honda Crv 4 Cyl All Wheel Drive Automatic 108000 Miles Honda Uses Two Flat Head Machine Screws To Hold The Brake...
2005 Honda Crv
2005 Honda Crv There Are Two Phillips Head Scews On The Face Of The Rotor For The Back Breaks, Do The Have To Come Out To Remove...
2001 Honda Crv Rotors
Tires And Wheels Problem 2001 Honda Crv 4 Cyl Two Wheel Drive Automatic 150, 00 Miles How Do I Remove Center Nut To Get Rotor Off
Can A Sticking Caliper Slide Pin Make Brake Pedal Go...
Brake Pedal Soft, Goes To Floor. Master Brake Cylinder Replaced Twice. Dealership Says Right Front Caliper Slide Pin Sticking. Does This...
Ask a Car Question. It's Free!
How to Fix a Brake Pull
Brake Light Switch
Bleed and Flush
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.