Car wont start

REMOVAL

Perform pre-service and fuel pressure release procedures. See: Fuel Pressure Release Service and Repair
Remove upper intake manifold.
Carefully remove connectors from fuel charging wiring to individual fuel injectors as required.
Remove fuel injection supply manifold.
Fuel Injector
Remove fuel injector retaining clips as required.
Grasping fuel injector body, pull up while gently rocking fuel injector from side to side.
Inspect fuel injector O-rings (two per fuel injector) for signs of deterioration. Replace as required.
Inspect fuel injector body, end cap and washer for signs of dirt and deterioration.