Heater switch

Tiny
ROYBOY
  • MEMBER
  • 1998 FORD FOCUS
  • 4 CYL
  • FWD
  • MANUAL
  • 100,300 MILES
Put a new heater blowing switch on but there is still no heat blowing out
Do you
have the same problem?
Yes
No
Friday, December 31st, 2010 AT 3:45 PM

2 Replies

Tiny
JJSTOTT
  • MEMBER
  • 2 POSTS
Probably the resistor or you may have got water in your blower motor from the pollen filter try the resistor first, easy to do as is the blower itself
Was this
answer
helpful?
Yes
No
Friday, December 31st, 2010 AT 9:49 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,005 POSTS
Check to see if there is power to the blower motor. If there is, remove the blower motor and see if it runs with power directly to it. If it doesn't, replace the blower motor. If there is no power to the motor, check the blower motor resister and relay. NOTE: Make sure there is power to the new switch too. Check fuses.
Was this
answer
helpful?
Yes
No
Wednesday, February 23rd, 2011 AT 7:24 PM

Please login or register to post a reply.

Sponsored links