SPONSORED LINKS

1998 Chrysler Cirrus wont turn over

Tiny
RAIKEL
  • MEMBER
  • 1998 CHRYSLER CIRRUS
  • 6 CYL
  • FWD
  • AUTOMATIC
1998 chrysler cirrus wont turn over, when engaged to start position brake light comes on and no other lights, starter doesnt engage.
Sunday, August 14th, 2011 AT 2:44 PM

2 Replies

Tiny
AUSERNAME123456
  • MEMBER
  • 106 POSTS
See if you can get a friend or neighbor to give you a jump start.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Sunday, August 14th, 2011 AT 3:52 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,164 POSTS
Have a helper turn the key to the start position while you check for voltage to the smaller wire on the starter. It should have 12 volts. If there is no power, work your way back to the starter relay (check for power) then to the ignition switch. If the only light coming on is the brake light, it could be ignition switch related or even one of the main power fuses under the hood in the power distribution box.
Was this
answer
helpful?
Yes
No
+1
Tuesday, September 6th, 2011 AT 5:10 AM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Not Cranking Over
GUIDE
Not Cranking Over
When your engine is not cranking (turning) over it will be mainly due to three separate areas, first it could be the battery, cables or poor connection, next is the starter...
VIEW MORE

Sponsored links