1998 Chrysler Cirrus Shaking

Tiny
KITMS7
  • MEMBER
  • 1998 CHRYSLER CIRRUS
  • 2.5L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 177,777 MILES
Okay I have been noticing lately that my car starts to shake when I idle it or brake at a light. I have put a lot of wotk into it but I cannot seen to find out what could be causing the shaking. It also shakes a bit when I first take off. I have replaced a lot of things like the motor mounts, etc. Can you tell me what to have checked out?
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Tuesday, December 2nd, 2014 AT 2:00 PM

4 Replies

Tiny
JOHNNYT73
  • EXPERT
Do you know if this car has a harmonic ballancer that has a rubberized insert built into it? Are you sure you do not have a misfire somewhere?
Was this
answer
helpful?
Yes
No
Tuesday, December 2nd, 2014 AT 2:49 PM
Tiny
KITMS7
  • MEMBER
No I dont believe it has a misfire. What is a harmonic balancer?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, December 3rd, 2014 AT 7:06 AM
Tiny
KITMS7
  • MEMBER
Okay when my rpm is over 1000 the car runs smooth but when I brake it and it drops a knotch or two under 1000 it begins to idle roughly. What could be causing that to happen?
Was this
answer
helpful?
Yes
No
Friday, December 12th, 2014 AT 7:24 AM
Tiny
JOHNNYT73
  • EXPERT
I would get a can of throttle body cleaner and spray around the intake to check for vacuum leaks.
Was this
answer
helpful?
Yes
No
Tuesday, January 27th, 2015 AT 7:05 AM

Please login or register to post a reply.

Related Mount Replace/Remove Content

Engine Mount Replacement
GUIDE
Engine Mount Replacement
Engine mounts are made of durable rubber which cushions the engine vibration from the vehicle frame. These mounts hold the engine in the car and are bolted to the engine...
VIEW MORE

Sponsored links