SPONSORED LINKS

1998 Chevrolet Truck high beam headlights

Tiny
RALLYWHEEL
  • MEMBER
  • 1998 CHEVROLET TRUCK
  • 5.0L
  • V8
  • 2WD
  • AUTOMATIC
  • 200,000 MILES
For a few months, but only every now and then, when I clicked my headlights up to bright, they just went out. I mean. ALL of the lights went out. Switch back to low beams was okay. Maybe five or ten minutes later. High beams worked just fine. About ten days ago, the high beams stopped responding completely. I'm thinking that I need to replace the turn signal switch on the 'column'. What do you think?
SPONSORED LINKS
Saturday, December 6th, 2014 AT 6:52 AM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check your relay first underhood either with a like relay or test it. Then test to see if wsitch sends power out when on high beam check the lt/grn wire to verify if it's switch or not
Was this
answer
helpful?
Yes
No
Saturday, December 6th, 2014 AT 7:00 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Sorry there isno relay just a drl relay in the convenience center under dash. It could be the drl module as well if you have them
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, December 6th, 2014 AT 7:01 AM

Please login or register to post a reply.

Related Headlight Switch Content

Headlight Switch
GUIDE
Headlight Switch
Manual headlight controls are executed by the driver or the body control computer auto is selected. The first position on a headlight switch is the running light ...
VIEW MORE

Sponsored links