HOW DO I INSTALL A NEW WINDOW

  • Tiny
  • wesf60
  • 1998 Chevrolet Tahoe
  • 18,000 miles

I got the old window out. I'm trying to put the new one in. And cannot get the roller arms in the slot built on the window. The window is in the door. Just not on the roller track.

Monday, August 6th, 2012 AT 9:14 PM

3 Answers

  • Tiny
  • hmac300
  • Expert
  • 42,153 posts

You are probably going to have to lower the regulator down as far as it goes then try to move window on an angle into the regulatoror take the regulator/motor assy off an ddo it that way.

Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 10:23 PM
  • Tiny
  • wesf60
  • Member

I will try thank you

Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 10:35 PM
  • Tiny
  • cadieman
  • Member

Youll need to tape the window all the way up. Then remove the window regulater and slide the rollers in the channel. Than turn the key on realign the regulater and bolt or rivet it back on.

Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 11:12 PM

Please login or register to post a reply.

Similar Questions