Replacing door hinge pin and bushings

TEVANS63

MEMBER
1998 CHEVROLET S-10

How to compress the spring and get in back in place

Wednesday, March 30th, 2011 AT 12:52 PM

1 Reply

MIKE H R

MECHANIC
3,094 POSTS

Most automotive store have tools that you can borrow. The spring compressor is small and compresses the spring in order to get it back in place. They can be put back in without the comprssor but it is hard to get them in with limited space

Please login or register to post a reply.

After Replacing The Hinge Pins In My Door The Driver&#...

I Replaced The Hinge Pins In My Door And Now My Driver Door Sits Along The Bottom But Is Gaped From The Bottom Of The Window Up, All The...

Asked by 76dolphins ·

2 ANSWERS

4 IMAGES

2001

CHEVROLET S-10

Door Hinge

How Do I Remove The Spring That Is Blcking The Upper Hinge Pin On My 2000 Chevy S10?

Asked by mike sams ·

2 ANSWERS

2000

CHEVROLET S-10

1998 Chevy S-10 Door

Interior Problem 1998 Chevy S-10 4 Cyl Two Wheel Drive Automatic How Do I Take The Inside Of The Door Off To Replace The Speakers

Asked by lykjpc ·

1 ANSWER

1998

CHEVROLET S-10

1991 Chevy S-10 Door Latch Pin Fell Out.....

The Pin On The B-pillar Has Fallen Out. So The Door Has Nothing To Keep It Closed Now. I Am Assuming The Nut Is Now At The Bottom Of The B-...

Asked by shvd98z24 ·

4 ANSWERS

1991

CHEVROLET S-10

1999 Chevy S-10 Programming Door Locks

The Power Door Locks Lock A Few Seconds After The Ignition Key Is Turned On. Can The Locks Be Programmed To Lock Only If The Transmission...

Asked by mechman29078 ·

3 ANSWERS

1999

CHEVROLET S-10

Sponsored links

Ask a Car Question. It's Free!

Replacing door hinge pin and bushings

1 Reply

Please login or register to post a reply.

Related Door Hinge Content

After Replacing The Hinge Pins In My Door The Driver&#...

Door Hinge

1998 Chevy S-10 Door

1991 Chevy S-10 Door Latch Pin Fell Out.....

1999 Chevy S-10 Programming Door Locks

Sponsored links