BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
The main pulley has separated from the harmonic balancer on my 1998 Chevy Lumina how does it face the engine?
1998 CHEVROLET LUMINA
I was able to get the pulley of the harmonic balancer and I need to know which way the pulley should go back on
have the same problem?
Sunday, February 26th, 2012 AT 10:46 PM
Are you referring to a pulley that's bolted on or has a rubber strip sandwiched in between the hub and cast outer ring?
Sunday, February 26th, 2012 AT 11:37 PM
to post a reply.
Related Harmonic Balancer Content
1998 Chevy Lumina Fuel Pump Wiring
I Have No Power To The Fuel Pump Circuit. Power To The Spark Plugs, But None To The Injectors.
Crankshaft Pulley Out Of Alignment
Six Cylinder Front Wheel Drive Automatic 152,000 Miles. Three Weeks Ago My Serpentine Belt Broke On My 3.1 Liter Engine. I Replaced It...
1998 Chevy Lumina Oil Change
Had Oil Changed The Next Day It Is Bone Dry. What Do I Do? I Know That The 10 Or So Miles I Drove With No Oil Could Potentiallly Damage The...
Vacuum Line On Rear Vapor Canister
Hello, I Would Like To Replace The Hose On The Vacuum Canister On The Gas Tank, But I Can Not Find Anything About Which Hose I Have To Use...
Chevy Lumina Starter Connections
98 Chevy Lumina Car 3.1 Engine. Took The Starter Off But Didnt Label The Wires, Does The Orange Cable Go On The Bigger Stud Then The Purple...
Ask a Car Question. It's Free!
Harmonic Balancer Removal
Crankshaft Main Seal Replacement - Front
Step by Step Timing Chain Replacement Guide
Help us make this site better
Online car repair manuals
Terms & Conditions
© 1999 - 2019 2CarPros, Inc.