BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
1997 PONTIAC TRANSPORT
Changing upper and lower intake manifold gaskets putting new one felpro gaskets do I need to put gasket sealant on both gaskets.
have the same problem?
Thursday, December 1st, 2011 AT 1:43 AM
No, only use sealant on the ends of the intake. The gaskets are good by themselves, the ends where the manifold sits on the block need the sealant.
Thursday, December 1st, 2011 AT 2:04 AM
Thursday, December 1st, 2011 AT 2:05 PM
Please consider a donation if we helped you
Friday, December 2nd, 2011 AT 3:51 AM
to post a reply.
Related Intake Manifold Gasket Replace/Remove Questions
I Did Work On My Car I Put New Upper And Lower Intake Manifold Gaskets, New Value Cover Gaskets, Put New Thermostat Put Back Everything...
1997 Pontiac Transport Intake Gasket Or Thermostat?
Engine Cooling Problem 1997 Pontiac Transport 6 Cyl Two Wheel Drive Automatic 197000 Miles 997 Pontiac Transport With 3.4 Litre...
Upper Intake Manifold Bolts
Am Removeing The Upper Intake Manifold To Change The Lower Intake Manifold Do I Need New Bolts For The Upper Intake Manifold And Whats The...
Upper Intake Manifold
Upper Intake Manifold Changing Gasket Do I Need New Bolts For The Intake Manifold When Reinstalling The Manifold
Ask a Car Question. It's Free!
Intake Manifold Replacement
Intake Manifold Replace Mercedes Benz C230
Throttle Bore & IAC Service Toyota Tacoma
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.