The blower is located at the right side of the HVAC blower module near the right of the vehicle.
Remove or Disconnect
1. Nuts and cross brace bar.
2. Electrical connector from blower motor.
3. Cooling tube from blower motor.
4. Screws attaching blower motor to blower module assembly.
5. Blower motor.
Install or Connect
1. Blower motor.
2. Blower motor attaching screws.
* Screws to 6 N.M (5 lb. In.).
3. Cooling tube to blower motor.
4. Electrical connector to blower motor.
5. Cross brace bar and nuts.
* Nuts to 25 N.M (18 lb. Ft.).
Wednesday, January 5th, 2011 AT 2:04 AM