Check engine light on code p 0 302 number 2 cyl.

Tiny
DRIPPER
  • MEMBER
  • 1997 NISSAN TRUCK
  • 227,000 MILES
Check engine light on code p 0 302 number 2 cyl misfiring change spark plug and wire also disb cap and rotor cleared code but it cane back on a few days later
Do you
have the same problem?
Yes
No
Wednesday, June 13th, 2012 AT 10:38 PM

4 Replies

Tiny
SATURNTECH9
  • EXPERT
Your details above were cut off could you please explain them again?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, June 13th, 2012 AT 10:42 PM
Tiny
RASMATAZ
  • EXPERT
Check no.2 cylinder compression and injector if okay-check crankshaft positioning sensor-
Was this
answer
helpful?
Yes
No
Wednesday, June 13th, 2012 AT 10:50 PM
Tiny
SATURNTECH9
  • EXPERT
The compression test and check the injector is a good idea. But in all my years of working on cars I have never seen a bad crank shaft position sensor cause just one cylinder to missfire and be the same cylinder everytime.
Was this
answer
helpful?
Yes
No
Wednesday, June 13th, 2012 AT 11:04 PM
Tiny
RASMATAZ
  • EXPERT
You can also go to this walk thru link for misfires: https://www.2carpros.com/articles/engine-misfires-or-runs-rough
Was this
answer
helpful?
Yes
No
Wednesday, June 13th, 2012 AT 11:29 PM

Please login or register to post a reply.

Related Plug Wire Replace/Remove Content

VIEW MORE

Sponsored links