No, just one for the turn signals. Check the fuses. Make sure the flashers are working as well.
November, 12, 2012 AT 11:47 PM
I havent checked the fuses yet and thats because I dont know which one to check I dont have a oweners manuel either, and the flashers dont work. The right signal works can you help me with this probles?
November, 12, 2012 AT 11:49 PM
If the right works, the flasher is good and the fuse is good.
Check the bulbs first, beyond that it may be the turn signal switch
November, 13, 2012 AT 12:15 AM
Its not the turn signal switch due to my mecanic said that its not that. He wanted for me to ask you which fuse by the panel inside the car is to the signals because theres not a diagram on the fuse panel. Do I take them out one at a time to check thats my question, or do you know how I could either get a manuel thats usally in the glove-department or how do I get a picture of where the fuses go so I know which one to chesk?
November, 13, 2012 AT 12:25 AM
Once again, if the one side works, it is not the fuse. There is no fuse for the other side
how does he know it is not the switch? Does he have a shop or is he a back yard guy
November, 13, 2012 AT 1:29 AM
Is there any way it can be a fuse sensor or is it called a fuse relay
November, 13, 2012 AT 1:31 AM
I checked all the fuses on the side panal in the truck and there all good.
November, 13, 2012 AT 1:46 AM
I know, just what I told you.
November, 13, 2012 AT 1:54 AM
And yes he is a back yard guy I ve known him for most of my life
November, 13, 2012 AT 1:59 AM
So I will have him re-check the switch. Thanks roy have a blessed evening.