Conversion

Tiny
CHUCKSTEWART
  • MEMBER
  • 1997 FORD F-250
  • V8
  • 4WD
  • AUTOMATIC
  • 122 MILES
I have a 1997 f250 light duty, 7 lug hubs. I want to convert it to 8 lug hubs and axles. What dose this take as far as parts? I will use used parts as much as possible and do my own work. Thanks for mthe help. Chuck
Do you
have the same problem?
Yes
No
Monday, November 29th, 2010 AT 10:59 PM

3 Replies

Tiny
HMAC300
  • EXPERT
It will take probably a new axle in the rear. And new hubs for the fornt as well asn new rotors as well as maybe brake parts.
Was this
answer
helpful?
Yes
No
Tuesday, November 30th, 2010 AT 12:09 AM
Tiny
CHUCKSTEWART
  • MEMBER
You dont really know about it then?
Was this
answer
helpful?
Yes
No
Tuesday, November 30th, 2010 AT 2:14 AM
Tiny
HMAC300
  • EXPERT
Yes I now about it but why would you want to spend the money? It still wouldn't do you much if any good to do it. But hey if you want to do it then go ahead. I put probably down ecause there may be more than what I described to doing this type of thing.
Was this
answer
helpful?
Yes
No
Tuesday, November 30th, 2010 AT 2:48 AM

Please login or register to post a reply.

Recommended Guides