BECOME A MEMBER
Sign up with Facebook
I AGREE TO THE
Login with Facebook
BECOME A MEMBER
HOW MUCH POUNDS TO SET MY TORQUE WRENCH FOR TO TIGHTEN MY CYLINDER HEAD OF MY 1997 DAEWOO CIELO.
1997 DAEWOO CIELO
Its engine type is the single cam MPFI(without ABS)
have the same problem?
Saturday, September 3rd, 2011 AT 11:55 PM
1st step 25Nm
2nd step with a degree plate turn 70 Deg
3rd step turn another 70 Deg
4th step run to normal operating temp and tighten all bolts a further 30 deg.
Note: these are torque to yield bolts and new bolts should only be used, re using old head bolts will cause the gasket to fail as they will be over stretched and will not torque down correctly.
Wednesday, September 7th, 2011 AT 7:58 AM
to post a reply.
Other Cylinder Head Questions
99 Subaru Head Torque
What Is The Head Torque On A 99 Subaru Legacy Outback 2.5l, Which Is The Number 1 Bank, The Right Or The Left
Not Starting When Cylinder Head Is Fitted
My Toyota Harrier Once Overheated And Then I Gave The Cylinder Heads To The Engineers They Skimmed And Reconditioned The Cylinder Heads. ...
Which Is The Front And Rear Cylinder Head For A 3.0 Ohv Engine The 14 Or 15 On A 1999 Mercury Sable
What Sensor Sits On The Inside Of Cylinder Head On The...
What Sensor Sits On The Inside Of Cylinder Head On The Isuzu Kb320 V6 On R H Side At The Back
Related Cylinder Head Questions
Hi Can You Please Tell Me The Head Settings For This Model ...
Where Do The O Rings Go On The Head For This Year And Model
Torque Specification, Cylinder Head, Connecting Road, Main ...
Ask a Car Question. It's Free!
Wonder How A Cylinder Head Works? See It Here
Spark Plugs and Wires Replacement GMC Sierra
How to Fix Coolant in Your Engine Oil
Find a car manual for your car
© 1999 - 2016 2CarPros, Inc.