Blinkers and flasher

Tiny
TLONEMAN5
  • 1997 CHRYSLER LHS
  • 200,000 MILES

I've replaced the flasher relay and I still cant get the blinkers to work. Fusses are ok does anyone have any ideals.

Do you
have the same problem?
Yes
No
Sunday, April 1st, 2012 AT 8:23 PM

5 Replies

Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

Re check all the bulbs that need to work

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Sunday, April 1st, 2012 AT 8:33 PM
Tiny
TLONEMAN5
  • MEMBER

None of the bulbs lightup even the ones on the dash for the blinkers.

Was this
answer
helpful?
Yes
No
Sunday, April 1st, 2012 AT 10:48 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

Check the fuses and if they are ok, the switch is defective

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Sunday, April 1st, 2012 AT 10:55 PM
Tiny
TLONEMAN5
  • MEMBER

The fusses are good. Everything else on the blinker switch works like the windshield wipers and the high beam just not the hazzards and blinkers its got me stumped

Was this
answer
helpful?
Yes
No
Sunday, April 1st, 2012 AT 11:29 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

I would look at the switch to see if voltage is coming out of it to go to the lights.

Roy

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Sunday, April 1st, 2012 AT 11:54 PM

Please login or register to post a reply.

Related Hazard Light Flasher Questions

Help us by donating