BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Replaced EGR valve drove the car about 40 miles.
1997 CHRYSLER CONCORDE
Replaced egr valve drove the car about 40 miles it jerked going up hill and the check engine light came back on codes say egr valve not working.
have the same problem?
Wednesday, March 6th, 2013 AT 6:56 PM
Diagnostic fault codes never say to replace parts. They only indicate the circuit or system that needs further diagnosis. What is the exact code number?
Wednesday, March 6th, 2013 AT 7:14 PM
Autozone did not give me the code number all they said it was egr valve circunt
Thursday, March 7th, 2013 AT 11:22 PM
That's the system that needs to be diagnosed to see what's not working or is plugged with carbon.
Friday, March 8th, 2013 AT 12:27 AM
to post a reply.
Related EGR Valve Replace/Remove Questions
1997 Chrysler Concorde Egr Valve R&r
Engine Mechanical Problem 1997 Chrysler Concorde 6 Cyl Front Wheel Drive Automatic 100000 Miles 3.5l Engine. I've Got Big Hands An...
Egr Low Flow Error After Pcv Valve Change? Causes?
I Had Decided To Replace The Pcv Valve After Having Issues With An Oil Leak. The Oil Leak Had Been Solved From That. Now However, I Have...
3.2 L Egr Valve Replacement Location Information...
Hello, 98 Chrysler Concorde With The 3.2 Liter Motor In It. The Check Engine Light Is Coming On Now And The Car Has Been Running Rough For...
I Want To Do An Ohm Test On My Egr Valve. Manual Says...
I Want To Do An Ohm Test On My Egr Valve. Manual Says It Should Be 6 Ohms Between Pins 4 And 6. I Set The Meter At 200 Ohms And Reading Is...
Ask a Car Question. It's Free!
Code Read Retrieval/Clear Honda Civic
Code Read Retrieval/Clear
How to read codes Chevrolet Blazer
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.