1997 CHEVROLET TRUCK
205,000 MILES
Avatar
BOBKZ1000
  • MEMBER
  • 2 POSTS
have po300 code replaced plugs,wires,fuel pump ,fuel filter inector spyder,fuel sending unit & wires in tank intake plainom gasegtt run all kides of fuel cleaner in it clear codes start it let it run less then a min. po300 code comes right back
Oct 30, 2012 at 6:53 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
check fuel pressure first, then check for vacuum leak at manifold. if both of those good then ccheck compression 60-66 psi for anything other than a 7.4l 56-62 for 7.4L
Oct 30, 2012 at 7:05 PM
Advertisement
Avatar
BOBKZ1000
  • MEMBER
  • 2 POSTS
thanks will get right on it will let you know
Oct 30, 2012 at 7:10 PM