1997 Chevrolet S-10 Replace Engine or Rebuilt ENGINE

Tiny
RON347
  • MEMBER
  • 1997 CHEVROLET S-10
  • 2.2L
  • 4 CYL
  • 2WD
  • MANUAL
  • 245,000 MILES
The cylinder Head on the engine is stop up with carbon. Should I get the engine take a part and clean. And when put back together. Or while Iam in it just replace parts what parts should I replace can give me a list. And if I buy a rebuilt engine where a good place to buy one that will be like oem. Any help will be Thank
Do you
have the same problem?
Yes
No
Monday, November 25th, 2013 AT 4:06 PM

4 Replies

Tiny
JACOBANDNICKOLAS
  • EXPERT
There are products that will clean the carbon from the engine. Have you checked on that?
Was this
answer
helpful?
Yes
No
Monday, November 25th, 2013 AT 5:22 PM
Tiny
RON347
  • MEMBER
YES
Was this
answer
helpful?
Yes
No
Monday, November 25th, 2013 AT 5:29 PM
Tiny
JACOBANDNICKOLAS
  • EXPERT
They didn't help? If you are replacing the head or cleaning it, removal is a last resort. However, make sure to replace all gaskets, timing chain, and I would recommend having the head checked to make sure it is true and flat.

Can you explain what the vehicle is doing? I would hate to see you remove the head if it isn't needed.
Was this
answer
helpful?
Yes
No
Monday, November 25th, 2013 AT 5:33 PM
Tiny
RON347
  • MEMBER
PO401 code change EGR still get this code. Put a carmer down the Cylinder and it stop up.
Was this
answer
helpful?
Yes
No
Monday, November 25th, 2013 AT 5:43 PM

Please login or register to post a reply.

Sponsored links