1996 Mercury Marquis door

BIGJOEINK

MEMBER
1996 MERCURY MARQUIS
4.6L
V8
RWD
AUTOMATIC
200,000 MILES

My driver door is not lining up to close properly and dome light stays on because of door issue. When I do get the door to close the dome light remains on

Sunday, December 7th, 2014 AT 6:39 AM

6 Replies

WRENCHTECH

MECHANIC
20,757 POSTS

Are you sure it's because of the door alignment?

The switches that control the lights for open doors are made right into the door latches and they have a history of sticking and causing problems like that.

Here is a technique that often works well and eliminates the problem at no cost.

Get a can of spray lube like WD40 or something like it and has a straw on the nozzle. Spray it generously up into the latch mechanism. Now open and close the door numerous times to work it in. Repeat this process several times.

SPONSORED LINKS

Was this

answer

helpful?

Yes

-1

Sunday, December 7th, 2014 AT 8:08 AM

BIGJOEINK

MEMBER
4 POSTS

Yes im sure its the door because I have to lift the door to close it.I was also told it is my door hinge pins. That I dont know how to chane at this moment

Was this

answer

helpful?

Yes

Sunday, December 7th, 2014 AT 10:16 AM

WRENCHTECH

MECHANIC
20,757 POSTS

Yes it needs new hinge pins. If you want to try a boor man's fix, get a floor jack and a block of wood and jack up on the end of the door with it open just a little. That will bend it into place.

Was this

answer

helpful?

Yes

Sunday, December 7th, 2014 AT 10:21 AM

BIGJOEINK