Turn signal flasher

Tiny
TOM LAFEVER
  • MEMBER
  • 1996 LINCOLN TOWN CAR
  • V8
  • 2WD
  • AUTOMATIC
  • 154,000 MILES
How to replace the turn signal flasher in a 1996 lincoln town car
Do you
have the same problem?
Yes
No
Wednesday, January 19th, 2011 AT 4:47 PM

3 Replies

Tiny
KEN
  • ADMIN
Hello,

There is no turn signal or hazard signal flasher for this car because it has a lighting control module that job. Here is the location of the lightning module which is located under the dash and blinker wiring diagrams as well.

Here is a guide to help you do some testing:

https://www.2carpros.com/articles/how-to-use-a-test-light-circuit-tester

Check out the diagrams (below).

Please let us know if you need anything else to get the problem fixed.

Cheers, Ken
Was this
answer
helpful?
Yes
No
-1
Saturday, January 6th, 2018 AT 3:11 PM
Tiny
ANGELO103
  • MEMBER
  • 1999 LINCOLN TOWN CAR
  • 4.1L
  • V8
  • 2WD
  • AUTOMATIC
  • 99,000 MILES
With engine running and also when not, I hear a clicking noise, like a turn signal is on, although it is not on. Every thing works fine, But clicking noise continues, except when I apply my brakes.
I thought of the Light Control Module, and also the Flasher.
Can you help me?
Was this
answer
helpful?
Yes
No
+2
Saturday, January 6th, 2018 AT 3:12 PM (Merged)
Tiny
HMAC300
  • EXPERT
Try to find where the clicking noise is coming from it's probably a relay that has gone bad or is getting apower surge. Check around your fuse box
Was this
answer
helpful?
Yes
No
-1
Saturday, January 6th, 2018 AT 3:12 PM (Merged)

Please login or register to post a reply.

Recommended Guides