96 Honda Accord. Automatic trans. 4cyl. Non V-Tech. How do I replace the water pump?

Tiny
PLV42196
  • MEMBER
  • 1996 HONDA ACCORD
  • 120,000 MILES
From wat I understand the crank bolt turns same direction as crank pully4water pump. And that I needed to have the crank bolt broken via impact in order to attempt replacement of water pump. Is this so?If so how?If not so where do I begin?I have sum experience with vehicle repair however this is sumthing I have never heard this before and wanted sum verification. Please help. And Happy early holidays.
Do you
have the same problem?
Yes
No
Sunday, October 2nd, 2011 AT 2:49 AM

1 Reply

Tiny
MHPAUTOS
  • EXPERT
There is a special tool that holds the crankshaft pulley and lock the engine so you can undo that bolt, otherwise you may have to get it loosened and then nipped up with a 3/4"impact gun, these are extremely tight to undo.
Was this
answer
helpful?
Yes
No
Sunday, October 2nd, 2011 AT 2:55 AM

Please login or register to post a reply.

Recommended Guides