SPONSORED LINKS

WE HAVE JUST REPLACED CRANK SENSOR AND KNOW ITS...

  • Tiny
  • Anonymous
  • 1996 Holden Commodore
  • 280,000 miles

We have just replaced crank sensor and know it's not working and car reads the same code, code 46 which says replace crank sensor and we just did, stuck don't know hay 2 do?

SPONSORED LINKS
Sunday, February 3rd, 2013 AT 4:21 AM

1 Reply

  • Tiny
  • mhpautos
  • Expert
  • 30,591 posts

There are two different crank shaft position sensors depending on date of manufacture make sure you have the correct one and also ensure that the vanes and the contact ring on the harmonic balance have not been damaged during installation, this is easily done if care is not taken.

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, February 3rd, 2013 AT 6:41 AM

Please login or register to post a reply.

Similar Questions

Cant Clear Code 46 On 91 Jaguar Xj6 4-0

Cant clear code 46 say idle controle valve have replace three lef battery cable loos all night no change what could it bee
Asked by sdfgh ·
1 ANSWER

1989 Jaguar Xj6 Code 46 And 47

These codes clear but reset almost as soon as I start driving. How do I repair the problem
Asked by blackjag ·
3 ANSWERS
1 IMAGE

I Need To Change The Transmission Oil And Filter...

I need to change the transmission oil and filter as well as the rear differential fluid on my 2008 explorer sport trac, rear wheel driv
Asked by sirjr ·
4 ANSWERS

Would Tike To Know What These Codes Mean 43 44 ...

Runs alittle ruff acts like it want to cut off
Asked by mircale ·
1 ANSWER
1 IMAGE