To replace dimmer switch, do I have to pull steering wheel?

Tiny
BLUEANGEL
  • MEMBER
  • 1996 DODGE RAM
  • 208,000 MILES
Head lights go out but not dash lights.
Sometimes they come back on, when I use the dimmer switch.
Do you
have the same problem?
Yes
No
Friday, August 26th, 2011 AT 12:25 PM

1 Reply

Tiny
KHLOW2008
  • EXPERT
MULTIFUNCTION SWITCH

Removal & Installation

Disconnect and isolate negative battery cable.
On tilt columns, remove tilt lever.
Remove upper and lower steering column covers. Remove Torx screws.
Pull switch away from column, and loosen connector screw (screw remains in connector).
Remove switch.
To install, reverse removal procedure.
Was this
answer
helpful?
Yes
No
Friday, August 26th, 2011 AT 1:02 PM

Please login or register to post a reply.

Recommended Guides