I CHANGED THE FUEL FILTER ON MY 96 SEBRING AS IT...

  • Tiny
  • 1950jnlz
  • 1996 Chrysler Sebring
  • 85 miles

I changed the fuel filter on my 96 sebring as it had been sitting for the past 2 years also drained the fuel tank and put in fresh fuel the car started right up and ran for about 5 min and then quit. I checked to make sure it was getting fuel and that's fine it cranks and fires but it still will not start it has a new timing belt so that's not the issue could it be that its not getting the right spark and after it cranks for a bit the automatic shut down cuts of the fuel? What do I need to check i'm not a mechanic please help.

Sunday, January 27th, 2013 AT 3:28 PM

1 Answer

  • Tiny
  • hmac300
  • Expert
  • 41,648 posts

Scan for codes and check fuel pressure first you need a pressure number not it's fine

Was this
answer
helpful?
Yes
No
Sunday, January 27th, 2013 AT 4:33 PM

Please login or register to post a reply.

Similar Questions