Vacuum line diagram from EVAP purge

Tiny
MADUKESKY
  • MEMBER
  • 1996 CHEVROLET MONTE CARLO
  • 142,000 MILES
Car studders and will stall at an idle. Changed plugs, wires, ignition module, coil pack and evap purge solnoid. 2 codes come up. Egr pintle position and evap solenoid error. We are wanting to double check the vacuum line positions to verify they are correct but the sticker inder the hood has been removed. It is the z34 with a 3.4 l engine
Do you
have the same problem?
Yes
No
Sunday, December 4th, 2011 AT 3:40 PM

1 Reply

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
What are the exact code numbers not code descriptions?For the running condition sounds like you egr valve is sticking open causing a vacuum leak. When its running bad remove the egr valve and see if its stuck open. Let me know whag you find.
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 4:06 PM

Please login or register to post a reply.

Sponsored links