BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
How do I set camshafts timming when the pulles have been taken off the cams
1995 VOLVO 960
The cams do not have keywaes to hold pulleis in a certen spot
have the same problem?
Friday, August 26th, 2011 AT 6:20 PM
Needed two special tools Crankshaft locking tool andCamshaft locking tool see diagrams. If you have them off need to take to Volvo Tech to straighten out
Images (Click to enlarge)
Friday, August 26th, 2011 AT 6:49 PM
What Doc is telling you is VERY important. If you install it wrong or crank the engine at the wrong time, you will be looking at a fortune in bent valves.
Friday, August 26th, 2011 AT 7:20 PM
to post a reply.
Related Camshaft Timing Content
1995 Volvo 960 Engine Timing
Engine Mechanical Problem 1995 Volvo 960 6 Cyl Two Wheel Drive Automatic I Sent My Car's Cylinder Head To Be Reconstructed Because One...
1995 Volvo 960 Camshaft Timing
Hi, The Camshaft Pulley Marks Of My Volvo 960 (1995 Model) Have Been Tampered With By A Previous Mechanic With Two-three Additional...
1992 Volvo 960 Cam Shaft Marks
I Have No Aligning Marks On The Cam Pulleys, How Do Irealign Them.
I Have A 97 Volvo 960 That I Am Changing The Head Gasket. I Have Reinstalled The Cams Along With The Top Head. I Then Check The Timing Of...
1997 Volvo 960 Cam Shafts Out Of Time
Engine Mechanical Problem 1997 Volvo 960 6 Cyl Two Wheel Drive Automatic 128k Miles I Replaced The Head Gasket And The Camshafts...
Ask a Car Question. It's Free!
How to Tell Which Cylinder is Misfiring!
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.