NOTE : The work is carried out inside the car.
A new type of blower motor has been developed. As a result, the blower motor cover must be modified when replacing the unit. See: Blower Motor Cover Modification
Disconnect battery ground lead.
Remove, on right-hand side: soundproofing panel under glove box
Disconnect positive terminal strip and bracket on blower housing.
Install: rubber gasket around blower housing
blower motor in housing.
Reconnect: blower motor connector
positive terminal strip on blower housing
battery ground lead.
Check blower operation at all speeds.
Install glove box and soundproofing panel.
Saturday, December 8th, 2012 AT 11:31 PM