1995 Toyota Tacoma replace crankshaft pulley

ALISSAW

MEMBER
1995 TOYOTA TACOMA
2.4L
4 CYL
2WD
MANUAL
156,000 MILES

The three pulleys in a row in front of crankshaft, the last one closest to motor wobbles and squeaks when I turn on head lights (or rainy, humid day) auto zone said harmonic balancer looked up online for part and found a single pulley and a triple pulley.I have the triple but can u replace just that last one or do I buy the triple?And how hard is it to put on?

Images (Click to make bigger)

Monday, April 14th, 2014 AT 8:42 PM

1 Reply

OBXAUTOMEDIC

MECHANIC
3,711 POSTS

Hello,

OK, the Harmonic Balancer comes as a unit, you cannot replace just one pulley on it.

As far as replacing it, it can be a job if you have never done one. The Radiator would have to be removed in order to have enough room to get to the bolt on the balancer, it is very tight and the easiest way to get it off is with an Impact Wrench. After that some will just pull off others will take a puller.

Hope this helps

Mark

Was this

answer

helpful?

Yes

No

Tuesday, April 15th, 2014 AT 4:58 AM