SPONSORED LINKS

Heater core

Tiny
GALOWSKID
  • MEMBER
  • 1995 PONTIAC GRAND AM
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 250,000 MILES
I have a Pontiac Grand AM SE 2.3L and I am replacing the heater core in it, I am having a hard time figuring out where it is located, so I don't take apart more than I have to can you please tell me what I need to do to accomplish this task? I have already drained the coolant.
SPONSORED LINKS
Sunday, November 21st, 2010 AT 9:29 PM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
HEATER CORE
CAUTION:DO NOT apply excessive force to heater core pipes.

Removal & Installation
1. Disconnect negative battery cable. Drain cooling system. Raise and support vehicle. Remove drain tube. Disconnect heater hoses from heater core. Lower vehicle.

2. Remove left and right sound insulators from below instrument panel. Remove steering column opening filler. Remove floor outlet duct. Remove heater core cover and heater core. See Fig. 10. To install, reverse removal procedure. Fill cooling system.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 22nd, 2010 AT 8:04 PM

Please login or register to post a reply.

Related Heater Heater Core Content

Heater Core Replacement
GUIDE
Heater Core Replacement
A heater core is positioned inside the car and is part of the HVAC system. Hot engine coolant is run through the core which air is blown through via the blower motor which ...
VIEW MORE

Sponsored links