1995 Oldsmobile Cutlass security light

Tiny
ALARMAN
  • MEMBER
  • 1995 OLDSMOBILE CUTLASS
  • 3.1L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 162,245 MILES
Car runs great but the security light is on not blinking how do I get this light to go off
Do you
have the same problem?
Yes
No
Thursday, February 13th, 2014 AT 7:59 PM

10 Replies

Tiny
HMAC300
  • EXPERT
Try a different key and if still on then have it scanned to see what is wrong with it.
Was this
answer
helpful?
Yes
No
Friday, February 14th, 2014 AT 7:27 AM
Tiny
ALARMAN
  • MEMBER
What kind of scanner do I need I have a odb2 will that work
Was this
answer
helpful?
Yes
No
Friday, February 14th, 2014 AT 10:51 AM
Tiny
HMAC300
  • EXPERT
I 'mnot sure on that one it may have what was called obd1.5 I think you would need a tech 1from gm for that one. 96 everyone went to OBD2 and if yours is an autoparts scanner it won't work anyhow as they only pick up engine/trans codes
Was this
answer
helpful?
Yes
No
Friday, February 14th, 2014 AT 12:07 PM
Tiny
HMAC300
  • EXPERT
If it has a 16pin connector it would work but I think yours will be 14
Was this
answer
helpful?
Yes
No
Friday, February 14th, 2014 AT 12:08 PM
Tiny
ALARMAN
  • MEMBER
The one I got I did not get from the auto parts store got it straight from auto X-ray it will monitor rpms temp and thing like that I will try a nother switch I know that won't work but if you are carefull you can change the chip from one switch to another switch Thanks for the help I won't for get this
Was this
answer
helpful?
Yes
No
Friday, February 14th, 2014 AT 1:03 PM
Tiny
ALARMAN
  • MEMBER
And it is a 16 pin or I can change cords and have the one for 96 and up
Was this
answer
helpful?
Yes
No
Friday, February 14th, 2014 AT 1:05 PM
Tiny
HMAC300
  • EXPERT
It has to be able to monitorthings like bcm's or any module in the car if you paid less than $4000 normally it won't do it.
Was this
answer
helpful?
Yes
No
Friday, February 14th, 2014 AT 1:05 PM
Tiny
HMAC300
  • EXPERT
If it's 16 pin then the obd2 should work
Was this
answer
helpful?
Yes
No
Friday, February 14th, 2014 AT 1:06 PM
Tiny
ALARMAN
  • MEMBER
Kown I told you the car run fine but I fould out if I let it run long enough it just cuts off but will crank right back up I scanned it said something about a passkey or something like that what do think it is
Was this
answer
helpful?
Yes
No
Saturday, February 15th, 2014 AT 7:29 PM
Tiny
HMAC300
  • EXPERT
Try a different key first like I said the first time then let a pro look at it.
Was this
answer
helpful?
Yes
No
Sunday, February 16th, 2014 AT 7:46 AM

Please login or register to post a reply.

Recommended Guides