What size nuts for brake lines at rear mounting block and ABS pump?

Tiny
EARL SCHUGAR
  • 1995 OLDSMOBILE CIERA
  • 145,000 MILES

No parts store can match the brake line nuts without seeing them off and I can't take them off and get to the store. I could use the old nuts but I hate doing repairs without replacing the hardware. Also I believe the old nuts work with a bubble flare. Will a new nut with an inverse double flare seal into the mounting block and pump if I used a pre-flared line?

Do you
have the same problem?
Yes
No
Saturday, July 14th, 2012 AT 11:17 PM

1 Reply

Tiny
ASEMASTER6371
  • EXPERT
  • 25,554 POSTS

Double flare to double flare.

You must remove them to match up. They make so many that you need to match up the line size and thread pitch.

Roy

Was this
answer
helpful?
Yes
No
Saturday, July 14th, 2012 AT 11:29 PM

Please login or register to post a reply.

Other Brake Line Replace/Remove Questions