BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Which no.# Piston do I need to have on top to set my crankshaft to replace my timing belt?
1995 ISUZU RODEO
Set all the marking on belt. Pulleys and crankshaft, still wont crank.I was using no.#1 piston to be up top-wont start-which piston is it?
have the same problem?
Tuesday, January 17th, 2012 AT 6:48 PM
-No.1 piston should be on its compression stroke not on exhaust-double check if its correct-look for fuel and spark
Tuesday, January 17th, 2012 AT 6:52 PM
to post a reply.
Related Timing Belt Replace/Remove Content
Rodeo Will Not Run With Belts On But Will Run Without.
My 1995 Isuzu Rodeo Will Run Without The Belts On But When I Put Them On It Will Not All Of The Pully's Are Free I Replaced The Timing Belt...
Step by Step Timing Belt Replacement Guide
Instructual repair video
I Replaced The Timing Belt And Forgot To Align The...
On A 2.2 Liter 4 Cylinder Engine. I Lost Compression. Is The Engine Ok I Recently Did A Major Tune Up On A 2001 Isuzu Rodeo 2.2 Liter...
Overheating Despite Replacing Almost The Entire...
My 98 Rodeo Overheats After About 20 Mins Of Idling Or 5 Mins Of Driving, Depending On The Rpms Or Speed. I Have Replaced The Thermostat...
How Do You Fix A Timing Issue
Okay So My Isuzu 3.2 V6 Is All Messed We Replaced The Timing Belt And Did Like Every Thing That A Machanic Would Do But Still The Cams Dont...
2004 Isuzu Rodeo
Is There A Guide On How To Change The Timing Belt On A 2004 Rodeo Somewhere Its 3.2l 4wd Engine. A Video Would Be Perfect But I Can't Find...
Ask a Car Question. It's Free!
How to fix an engine not starting
Engine Will Not Start
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.