Heater blower works when it wants to

Tiny
WICKED_CAIN
  • MEMBER
  • 1995 DODGE DAKOTA
  • 165,000 MILES
It will function fine for long periods of time and and then stop. Starts again the same way. It worked for over a month without issue. Stopped for a couple weeks and then started again. No warning in either direction.

One day It will start it up and the heater kicks right on no problems, and then another day I start it up and it will no?
Saturday, December 31st, 2011 AT 9:53 PM

6 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Do you have a multi-meter to do some testing?
Was this
answer
helpful?
Yes
No
Saturday, December 31st, 2011 AT 10:00 PM
Tiny
WICKED_CAIN
  • MEMBER
  • 3 POSTS
I have a test light and have tested all the fuses and they are working fine. However, I do not have a multi-meter.
Was this
answer
helpful?
Yes
No
Saturday, December 31st, 2011 AT 10:24 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
What you need to do is test for power and ground at the motor when it is not working. Also, have you checked for a loose or open terminal at the blower motor connector?
Was this
answer
helpful?
Yes
No
Saturday, December 31st, 2011 AT 10:38 PM
Tiny
WICKED_CAIN
  • MEMBER
  • 3 POSTS
I have not. But that is what I will do next. Thank you for the help. I will let you know how it turns out.
Was this
answer
helpful?
Yes
No
Saturday, December 31st, 2011 AT 10:45 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
You are welcome that is what were here for. Have a safe and happy new year.
Was this
answer
helpful?
Yes
No
Saturday, December 31st, 2011 AT 10:53 PM
Tiny
FRANK FULLER
  • MEMBER
  • 1 POST
I had this problem with mine. Turns out it was intermittent loss of connection at the blower resistor. When it would stop I could touch the resistor, which is on the bottom of the heater box and it would start working. Until it did not. I bought a new resistor that included a new connector and pigtail and it solved the problem. Hope this helps
Was this
answer
helpful?
Yes
No
Saturday, July 28th, 2018 AT 6:11 PM

Please login or register to post a reply.

Sponsored links