I only get semi warm heat, i change the thermastat and filled coolant, seems to be flow and does not overheat, why wont get hot?
Nov 16, 2012 at 2:56 PM
1995 Chrysler Cirrus Only Get Semi Warm Heat Change Thermastat Filled Coolant
1995 CHRYSLER CIRRUS
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Advertisement
i would start by flushing the heater core.
Remove both heater hoses from the firewall/heater core. run a garden hose and flow the water both ways through the heater core. reinstall hoses and refill the antifreeze.
another option is the blend door in the dash might not be fully swinging to the hot air position. it thats the case you might have to pull the dash to repair that issue.
Remove both heater hoses from the firewall/heater core. run a garden hose and flow the water both ways through the heater core. reinstall hoses and refill the antifreeze.
another option is the blend door in the dash might not be fully swinging to the hot air position. it thats the case you might have to pull the dash to repair that issue.
Nov 16, 2012 at 3:07 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.