BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
My turn signal fuse is blowing when I shift into reverse
1995 CHEVROLET TRUCK
I have a 1995 Chevrolet 1500 Pickup ext c 1/2t 4X with an automatic transmission. When I shift into reverse, the fuse for the turn signal blows. I have checked for bare wires with no success.
have the same problem?
Wednesday, November 30th, 2011 AT 9:00 PM
There is a torque converter clutch/brake switch on the pedal bracket
you may have a bad torque converter causing the problem. Have trans guy look at it
Thursday, December 1st, 2011 AT 12:39 AM
to post a reply.
Related Turn Signal Fuse Content
1989 Chevrolet Truck Turn Signals Rear Out
I Replaced The Rear Turn Signals Bulbs And They Still Don't Work They Blink Faster Then Normal And Front Signal Do Work And I Don't Think...
1995 Chevy Truck. When Headlights Are On And Then Use Turn Signals They Do Not Work Or The Flashers Will Come On. This Only Happens With The...
1995 Chevy Truck Driver's Side Rear Turn Signal And...
Two Weeks Ago, I Towed An Old Trailer With A Non-working Left Brake Or Turn Light. The Lights On My Truck Were Working Fine. I Coupled...
No Turn Signals
Electrical Problem 1989 Chevy Truck V8 Four Wheel Drive Automatic My Turn Signals Quit.I Changed The Fuse, Flasher Fuse, Turn Signal...
Blinkers Not Working
I Replaced My Turn Signal Cam And Fuse Last Night And My Blinkers Still Won't Work. What Else Should I Look For?
Ask a Car Question. It's Free!
Turn Signals Blink Fast
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.