BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I got a code PO341 so I replaced the CAM sensor but after about fifty miles the code came back.
1995 BUICK LESABRE
I cleared the code again and tried moving the wires around but so for hasn't helped, Help would be much appricated.
have the same problem?
Monday, January 23rd, 2012 AT 5:54 AM
P0341= cam/crank error. It could be the crank sensor. Make sure both sensors are receiving power. Check resistance of both sensors.
Monday, January 23rd, 2012 AT 7:11 AM
to post a reply.
Related Camshaft Camshaft Sensor Replace/Remove Content
1995 Buick Lesabre
1995 Buick Lesabre, V6,3800, 88,000 Miles When Vehicle Is Warm It Stalls Then Starts Right Back Up With Out Any Hesitation, Have Replaced...
I Have A 1995 Buick Lesabre That Started Running Rough...
I Have A 1995 Buick Lesabre That Started Running Rough. It Has Shut Down On Us, Lights All Lit Up And Then Restarted. We Changed The Fuel...
1990 Buick Lesabre Two Electrical Problems
Electrical Problem 1990 Buick Lesabre 6 Cyl Front Wheel Drive Automatic 139000 Miles Thank U In Advance 4 Your Assistance: First...
1997 Buick Lesabre Carpro Tech ,question
Engine Performance Problem 1997 Buick Lesabre 6 Cyl Front Wheel Drive Automatic 180 Miles Hi. I Have A Prob With This Old Lesabre I...
Hi I Have 3.8 Vin C Lesabre Limited Engine...
Hi I Have 3.8 Vin C Lesabre Limited Engine Stalling Under Acceleration But Only Sometimes Same Time Gauges Go Crazy Like Blurring Ok...
Ask a Car Question. It's Free!
Code Read Retrieval/Clear Chevrolet Camaro
Check Engine Light Clear
Code Read Retrieval/Clear - Dodge Stratus
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.