1994 Chevrolet Suburban Shaking at certain speeds

Tiny
DALLASLEBEAU210
  • MEMBER
  • 1994 CHEVROLET SUBURBAN
  • 5.7L
  • V8
  • 2WD
  • AUTOMATIC
  • 330,000 MILES
I have a 94 chevy Burban, 1500, 350,000 miles. When I speed up to 45 or so and again round 53-55 I get this shake. It's feels like it's up front. I'm wondering if anybody knows about this. Could I just need a rotate and balance, is it a u joint, do I need my driveshaft balanced or is this something more sinister(expensive). Any help from y'all chevy guys and gals would be greatly appreciated.
Btw I'm getting rotate and balance in about a week just because I know it needs one.
And another thing I thought of. Could the tire size be part of the problem. It has tires that are not normal truck size tires,
Tuesday, June 17th, 2014 AT 2:12 AM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Look around u joint seals if you see rust they are not good
Was this
answer
helpful?
Yes
No
Tuesday, June 17th, 2014 AT 5:25 AM
Tiny
DALLASLEBEAU210
  • MEMBER
  • 2 POSTS
Ok thank you for advice. Now for the bad part, um more electronics inclined than mechanically. Could you please explain how to check u joints.
Was this
answer
helpful?
Yes
No
Tuesday, June 17th, 2014 AT 11:06 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Like I said in previous reply rust around seals. Look at the joint cups and there are rubber seals around the cups. If you see rust then they may be bad but you would need to pull them off and feel for rough spots to absolutely make sure. But you need to pull driveshaft for that anyhow.
Was this
answer
helpful?
Yes
No
Tuesday, June 17th, 2014 AT 12:04 PM

Please login or register to post a reply.

Sponsored links