How to replace a water pump belt on a 1994 Cadillac Deville

Tiny
CADDIO
  • MEMBER
  • 1994 CADILLAC DEVILLE CONCOURS
  • 150,000 MILES
I know how to replace the serpentine belt, but there is a second smaller belt to put on the waterpump and I think tensioner on the 4.6 northstar
Do you
have the same problem?
Yes
No
Sunday, December 11th, 2011 AT 3:14 PM

1 Reply

Tiny
FACTORYJACK
  • MECHANIC
  • 4,159 POSTS
That is the water pump belt at the trans end of the front bank of cylinders. To replace it, move the spark plug wire harness out of the way, compress the tensioner and release the belt. Then you will need to un-bolt the tensioner, twist the belt at a right angle to pass between the w/p pulley and head. Reverse procedure to install.
Was this
answer
helpful?
Yes
No
+1
Sunday, December 11th, 2011 AT 6:07 PM

Please login or register to post a reply.

Sponsored links