BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Low compression on number 1 cylinder on 22 re engine after head gasket replacement
1993 TOYOTA PICKUP
Replaced head gasket on toyota pickup 22re engine now compression is low
on number 1 cylinder and a little low on number 2 can timing cam be off
a notch causing this
have the same problem?
Thursday, December 29th, 2011 AT 3:12 AM
Oh yeah the timming off can do that recheck your timing.
Thursday, December 29th, 2011 AT 3:14 AM
You sure its not a blown headgasket-2 lows on adjacent cylinders points to that direction
Thursday, December 29th, 2011 AT 4:23 AM
to post a reply.
Related Cylinder Head Gasket Replace/Remove Content
I Need The Hot Tricks On Removing The Cylinder Head To...
I Am Needing To Remove The Cylinder Head On My 2002- Tacoma - 2wd - Prerunner - 2.7l Engine - 4 Cyl - 220,000 Miles - I Am At A Point I Need...
How Do I Change The Head Gasket On My Truck?
I Took Off The Head, I Need To Take Off The Head Bolts Now And Need The Sequence For Taking The Bolts Off. This Is My Dads Truck And I...
1985 Toyota Pickup Diagnostic Test For Cracked...
Engine Mechanical Problem 1985 Toyota Pickup 4 Cyl Two Wheel Drive Manual 146k Miles Truck Overheated, No Coolant In Radiator. Engine...
Cylinder #4 Not Firing Engine Overheating After 15mins Of Driving Losing Coolant Not Sure Where No Heat In Heater, Sometimes I Can See...
1986 Toyota Pickup Burning Coolant
Engine Starts And Runs Ok When Cold. As Soon As It Comes Up To Temperature, It Starts To Emit White/vapor Smoke From Tailpipe And Idle...
Ask a Car Question. It's Free!
Coolant Mixing with Oil
Engine Oil Change and Filter
Oil and Filter Toyota Camry 2007-2011
Find a car manual for your car
Terms & Conditions
© 1999 - 2018 2CarPros, Inc.