1993 Pontiac grand am no power to ecu

1993 PONTIAC GRAND AM
100,000 MILES • 2.3L • 4 CYL • FWD • AUTOMATIC
Avatar
TSWALKER84
  • MEMBER
  • 1 POST
My car went from working to not in the matter of a hour sitting. No power is getting fuel pump or the ecu. I have replace f/p and ecu, still nothing. I have check all fuses and relays I can find and all are good. Never had any problems with this car till now. This is my only car and desperately need some help. I tested the f/p and I know it does work, just not in the car. Also nothing on my dash works ie. Gauges, warning lights, nothing it's completely dead. The car will turn over just never starts even when using starter fluid.
Nov 6, 2014 at 11:59 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
check fusible link in pic at starter probably burnt up these are available at auto parts
Nov 6, 2014 at 12:20 PM
Advertisement
Avatar
TSWALKER84
  • MEMBER
  • 1 POST
I can't find any fuse. The starter works. Will turn the motor over and over, just never starts.
Nov 7, 2014 at 6:59 PM
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
the diagram clearly shows a fusible link which is a wire connected at starter recheck it they are available at auto parts
Nov 8, 2014 at 6:09 AM