SPONSORED LINKS

1993 Pontiac Grand Am no power to ECU

Tiny
TSWALKER84
  • MEMBER
  • 1993 PONTIAC GRAND AM
  • 2.3L
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 100,000 MILES
My car went from working to not in the matter of a hour sitting. No power is getting fuel pump or the ecu. I have replace f/p and ecu, still nothing. I have check all fuses and relays I can find and all are good. Never had any problems with this car till now. This is my only car and desperately need some help. I tested the f/p and I know it does work, just not in the car. Also nothing on my dash works ie. Gauges, warning lights, nothing it's completely dead. The car will turn over just never starts even when using starter fluid.
SPONSORED LINKS
Thursday, November 6th, 2014 AT 11:59 AM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check fusible link in pic at starter probably burnt up these are available at auto parts
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
+1
Thursday, November 6th, 2014 AT 12:20 PM
Tiny
TSWALKER84
  • MEMBER
  • 1 POST
I can't find any fuse. The starter works. Will turn the motor over and over, just never starts.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, November 7th, 2014 AT 6:59 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
The diagram clearly shows a fusible link which is a wire connected at starter recheck it they are available at auto parts
Was this
answer
helpful?
Yes
No
Saturday, November 8th, 2014 AT 6:09 AM

Please login or register to post a reply.

Related Engine Computer Fuse Content

Engine Control Module (PCM) Fuse
VIDEO
Engine Control Module (PCM) Fuse
Instructional repair video
Engine Computer Fuse Fails
GUIDE
Engine Computer Fuse Fails
Each manufacturer designs their engine wiring systems a little differently, but one thing that stays the same is what an engine fuse supplies power to, such as the engine...
VIEW MORE

Sponsored links