SPONSORED LINKS

What all do I have to do to elimanate my turbo on my 93 Plymouth Laser

Tiny
JERRYNUNYA
  • MEMBER
  • 1993 PLYMOUTH LASER
  • 149,000 MILES
My laser originally came with a 2.0 non turbo, I purchased a used 93 2.0 turbo engine and installed it by replacing the turbo exhaust with my original non turbo exhaust, the motor runs very well however, the idle runs up and down between approx. 1000 and 1400 RPM about every 1-2 seconds, not when its cold, but the minute I put it in gear and go it stars Oscillating
SPONSORED LINKS
Wednesday, March 28th, 2012 AT 1:32 AM

4 Replies

Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Did you keep same computer? Sensors may not match.
Was this
answer
helpful?
Yes
No
Wednesday, March 28th, 2012 AT 6:27 AM
Tiny
JERRYNUNYA
  • MEMBER
  • 3 POSTS
Are you f****NG kidding me? You answer my question with a question. Of course I changed the computer. WHAT "ALL"! DO I HAVE TO CHANGE, OR DO TO MAKE A TURBO MOTOR A NON-TURBO MOTOR? The motor runs and drives very good! However the idle Oscillates up and down, between approx. 1000 and 1400 RPM.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, March 28th, 2012 AT 7:01 AM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Did it do this right from the get go? Generally speaking, a lean condition will cause idle surge.
Was this
answer
helpful?
Yes
No
Wednesday, March 28th, 2012 AT 7:35 PM
Tiny
JERRYNUNYA
  • MEMBER
  • 3 POSTS
NEVER MIND!
Was this
answer
helpful?
Yes
No
Thursday, March 29th, 2012 AT 1:32 AM

Please login or register to post a reply.

Related Turbo Replace/Remove Content

Sponsored links