How do you fix code 55(knock signal circuit RH bank)

Tiny
ROD J
  • MEMBER
  • 1993 LEXUS ES 300
  • 128,000 MILES
I change the knock sensors, throttle body, throttle position sensor, and the ecm. I had the negative battery cable disconnected and I pulled the efi fuse when I did all the work. The check engine light still comes on and goes off with the code 55 appearing.
Do you
have the same problem?
Yes
No
Tuesday, September 27th, 2011 AT 8:03 PM

3 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Wow, you replaced a lot of parts. In most cases I have seen, the connectors on the sensors are what fails. The end kit is about 30.
You really should have spent the money for a real diag from a shop. It would have prevented needless parts replacement.

Take a look at the chart I sent you for the code.

Roy
Was this
answer
helpful?
Yes
No
Tuesday, September 27th, 2011 AT 8:10 PM
Tiny
ROD J
  • MEMBER
  • 2 POSTS
Thanks a lot, I'll definitely look for that kit.
Rod J
Was this
answer
helpful?
Yes
No
Tuesday, September 27th, 2011 AT 8:17 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Good luck

Roy
Was this
answer
helpful?
Yes
No
Tuesday, September 27th, 2011 AT 8:19 PM

Please login or register to post a reply.

Sponsored links