1993 Chevrolet 5.7 efi map sensor readings

Tiny
RESTOREIT
  • MEMBER
  • 1993 CHEVROLET SILVERADO
  • 200,000 MILES
Getting 5 volts from a to c wire and 4.7 from a to be. Chiltons says reading fron a to b shoul be.5 volts. Please help with proper check procedures and if I have wron readings help on what to do.
Do you
have the same problem?
Yes
No
Friday, January 13th, 2012 AT 9:30 PM

1 Reply

Tiny
HMAC300
  • EXPERT
Give us the code next time. See attached pics. But before you do that if your hose going to the map sensor is soft then replace it as this is a lot of the problems. Also check the tbi gasket for leaking causing a vacuum leak, use choke cleaner to srpay around it if the rpm change it's leaking. This could cause the same thing. Also make sure pcv hose is not soft either and egr isn't opening at idle.
Was this
answer
helpful?
Yes
No
Saturday, January 14th, 2012 AT 12:42 AM

Please login or register to post a reply.

Recommended Guides